eSun ePA6-CF/ ePAHT-CF (Nylon Carbon Fiber) Filament Natural 1.75mm
Specification：
Filament diameter: 1.75mm ( +/- 0.05mm)
Color: Natural ePAHT-CF (nylon carbon fiber) is a material jointly developed by eSUN and LUVOCOM. Compared with PA66, the size and electrical properties of ePAHT-CF are less affected by humidity and temperature. The strength of ePAHT-CF is higher than other eSUN nylon series products. The surface of the printed items is matte and fine. On the basis of the performance of PA6, 15% high-rigidity carbon fiber is added, high-strength, high-rigidity, impact resistance, self-lubricating and abrasion resistance, excellent chemical resistance, high temperature resistance, the continuous use temperature of the parts can reach 150°C, and the short-term use temperature can reach 180°C. It can be detected by metal detector (≥ 2 mm³). The strip electrode insulation resistance and surface resistance are less than 102Ω. It can be used as a conductive and antistatic material. Compared with pure nylon, the shrinkage rate and water absorption rate are greatly reduced. The printed model has high dimensional stability, good mechanical performance, good interlayer bonding, excellent printability, low distortion, no warping, and no chamber or bed heat is required. Product advantages: High strength, high rigidity, the strength is much higher than other eSUN nylon series productsExcellent chemical resistanceHigh temperature resistanceHigh dimensional stabilityExcellent surface effectExcellent printability, good interlayer adhesion, no warpingConductive and antistatic Physical performance indicators: Filament ePAHT-CF Melt Index 19.68(270℃/2.16kg) density 1.4g/cm3 Impact strength 12.74 Tensile Strength 173.37Mpa Elongation at break 8.93% Bending strength 171.64Mpa Flexural modulus 5612.41Mpa Heat distortion temperature 190℃ Continuous use temperature (UL 746B) 150℃ Short-term use temperature 180℃ Bar electrode insulation resistance ≤10²Ω Surface resistance <10²Ω Physical performance indicators： Filament ePA-CF ePAHT-CF ePA12-CF ePAHT-GK Impact strength 18.67 KJ/M2 12.74 KJ/M2 11.33 KJ/M2 8.52 KJ/M2 Tensile Strength 140Mpa 173.37 Mpa 108.18 Mpa 80.75 Mpa Elongation at break 10.61% 8.93% 9.02% 10.35% Bending strength 140Mpa 171.64Mpa 116.58Mpa 88.54Mpa Flexural modulus 4363Mpa 5612.41Mpa 3335 Mpa 1743Mpa Heat distortion temperature 155℃ 190℃ 90℃ 75.4℃ Print parameters： Filament ePAHT-CF Recommended print temperature 260-300℃ Bed 45-60℃(Masking paper, PVP solid glue, glass board, carbon fiber board, PEI) Fan 0% Print speed 40-100mm/s Print performance comparison &
