eSun filament PLA-GF natural 1.75mm/1kg
High impact resistance and good printability of PLA. Suitable for prototyping mechanical parts with stiffness and impact resistance requirements. The wear-resistant performance makes it suitable for printing gears and can be used for temporary functional parts.
ePLA-GF has high stiffness and is not easy to bend. Excessive bending of the fiber should be avoided as much as possible in the feeding pipeline.
The ePLA-GF is very easy to grind the nozzle and gear of the extruder. It is recommended to use a hardened steel nozzle or a ruby nozzle. If conditions permit, a hardened steel extruder gear can be selected. If the printing time is long and a plug appears, replace the throat and nozzle
The blowing fan can be properly turned off to improve the strength of the model
Recommended printing parameters:
Extruder temperature (℃) 190 - 230℃.
Recommended temperature：215℃
Bed temperature (℃) 45 - 60℃
Fan speed 100%
Print speed 40 - 100mm/sec.
Optional heated bed
Recommended construction surfaces: masking paper, PVP solid adhesive, PEI
