eSun PEEK Pro filament, 1.75mm, natural, 0.25kg
- ePEEK Pro
Special plastic materials with excellent mechanical and thermal properties; high strength, high toughness, impact resistance; self-lubricating and wear-resistant properties, printable mechanical gears; flame retardant; resistant to corrosion by most chemical reagents and solvents; high temperature resistance Performance, the heat distortion temperature is as high as 205℃, and it can be used for heat-resistant parts.
Specification :
Diameter Size：1.75
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePEEK Pro |
| Density(g/cm3) | 1.3 |
| Heat Distortion Temp(℃,0.45MPa) | 205 |
| Melt Flow Index(g/10min) | 14.3(190℃/2.16kg) |
| Tensile Strength(MPa) | / |
| Elongation at Break(%) | 30 |
| Flexural Strength(MPa) | / |
| Flexural Modulus(MPa) | / |
| IZOD Impact Strength(kJ/㎡) | / |
| Durability | 10/10 |
| Printability | 6/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 400 – 450℃ Recommended temperature430℃ |
| Bed temperature(℃) | 130°C |
| Fan Speed | 0% |
| Printing Speed | 40 – 60mm/s |
| Heated Bed | Required |
| Recommended Build Surfaces | PVP solid glue, high temperature glue |
| Feature | |
| Flexible | —— |
| Elastic | —— |
| Impact Resistant | —— |
| Soft | —— |
| Composite | —— |
| UV Resistant | √ |
| Water Resistant | √ |
| Dissolvable | —— |
| Heat Resistant | √ |
| Chemically Resistant | √ |
| Fatigue Resistant | √ |
| Need drying | √ |
| Heated Bed Required | √ |
| Print recommend | Drying at 70℃/>6h, try to increase the constant temperature chamber and the bottom plate temperature, and strictly adjust the level before printing |
Ask a question
Write your opinion
