eSun PLA-Silk Magic filament gold silver1.75mm/1kg
eSun PLA-Silk Magic filament gold-silver 1.75mm/1kg
Table of properties :
Density(g/cm3) 1.256
Heat distortion temperature(℃, 0.45MPa) 54.7
Melt index(g/10min) 11.32(190℃/2.16kg).
Tensile strength (MPa) 57.64
Elongation at break (%) 21.76
Impact strength of IZOD (kJ/㎡) 6.45
Durability 4/10
Printability 9/10
Recommended printing parameters Extruder temperature(℃) 190 - 230℃ (Recommended temperature:210℃).
Bed temperature(℃) 45 - 60°C
Fan speed 100%
Printing speed 40 - 100mm/sec.
Recommended construction surfaces Masking paper, PVP solid adhesive, PEI
When a model printed with dual color pla filament is rotated, it has a dynamic appearance brought by two different colors. Compared with other materials, eSilk-PLA Magic is easier to peel, and the surface is smooth and flat; This magic pla filament is an upgrade based on PLA and has the same quality of easy printing.