Phaetus PS 0.6/1.75mm hardened steel nozzle
In 3D printing filaments, composite consumables containing abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigments are often very hard.Using regular nozzle printing, it will soon wear out the holes and inside diameter, destroying the original performance of the nozzle.
The hardness of the mo type of the hardened steel nozzle is 7.8, the highest printing temperature is 450 ℃, with high wear resistance, high temperature resistance. The Hardened Steel Nozzle is the user's first choice for printing high strength filaments!
Performance analysis:
The hardness over HRC60 makes minimum wear in hole size after long time printing with abrasives.
Temperature resistant up to 450 ℃, easy to handle with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle no burr on the edge of the tip and no contamination in the hole.
Inner hole roughness lower than Ra0. 4; higher smoothness and less grip.
Min 0.1mm / ± 0.01mm hole diameter in experimental level application to ensure high printing accuracy.
High-quality imported steel material ensures the stability of operation.
Applicable scenario:
Wear resistance, high temperature, suitable for 3D printing composites with abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigment, as well as conventional materials.