Phaetus PS Brass nozzle 0.3/1.75mm
The brass nozzle is suitable for printing PLA, ABS, TPU, PA, PP, PC, ASA, Nylon, PETG, PVA, HIPS and other conventional fibers. With wide application and low price, the brass nozzle can meet the daily printing needs of ordinary users.
Hardness (Mohs): 3
Maximum Printing Temperature: 300 ℃
Thermal conductivity: 105 W m * k
Coefficient of expansion: 18 µm / m · ℃
Yield analysis: Min hole diameter 0.1mm / ± 0.01mm in experimental level application to ensure high printing accuracy.
Tip size from 0.1 ~ 1.0mm, for 1.75 / 3.00 filament; compatible with most 3D printers available on the market.
Special processing technology and post-treatment make the nozzle no burr on the edge of the tip and no contamination in the hole; lasting shine for a long time without oxidation.
Inner hole roughness lower than Ra0. 4; higher smoothness and less grip.
The highest quality Brass material ensures stability of properties.
Wide application with high cost performance, printing well with conventional material such as PLA, ABS, TPU, PA, PP, PC, ASA, Nylon, PETG, PVA, HIPS etc.
Min. Hole Diameter φ0.10
Tolerance ± 0.01mm
Internal Bore Roughness ≤Ra0.4µm