• PS Plated Copper Nozzle for Phaetus Dragon hot-end

PS Plated Copper Nozzle for Phaetus Dragon hot-end

  • PS Plated Copper Nozzle
  • In Stock
  • 71.34zł

  • Ex Tax: 58.00zł

Available Options

- OR -
This product has a minimum quantity of 1
In 3D printing filaments, composite consumables containing abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigments are often very hard.The use of ordinary nozzle printing, will soon wear holes and inner diameter, destroying the original performance of the nozzle.

And mo type hardness of the hardened steel nozzle is 7.8, the highest printing temperature is 450℃, with high wear resistance, high temperature resistance. The hardened steel nozzle is the user's first choice for printing high strength filaments!
Hardness over HRC60 makes an minimum wear at the hole size after a long time printing with abrasive materials.
Temperature resistance up to 450℃, easily handling with special engineering plastics such as PEEK.
Special processing technology and post-treatment make the nozzle without burr at the edge of tip and without debris in the hole.
Inner hole roughness lower than Ra0.4; Higher smoothness and less adhesion.
Min. orifice diameter 0.1mm/±0.01mm in experimental level application, making sure high accuracy printing.
High quality imported die steel material ensures the stability of performance.
Wear-resistance, High temperature performance, suitable for 3D printing composites with abrasive additives such as Carbon Fiber, Steel, Wood, Boron Carbide, Tungsten and Phosphorescent pigment as well as conventional materials.
Min. Orifice Diameter
φ0.10
Tolerance
±0.01mm
Inner Hole Roughness
≤Ra0.4μm
Concentricity
≤0.02mm


Model
EAN 6973090160227, 6973090160241, 6973090160258
Technical
Expansion Coefficient 16,7 μm/m·℃
Hardness (Mohs) 6
Min Orifice Diameter φ0.10
Thermal Conductivity 330 W/m·k
Tolerance ±0.01mm
Technical Details
Nozzle max temperature 500℃

Write a review

Note: HTML is not translated!
    Bad           Good