FNIRSI 2C23T 3-IN-1 Oscilloscope Multimeter Signal Generator

FNIRSI 2C23T is a fully functional, highly practical 3-in-1 dual-channel digital oscilloscope with a high-resolution 2.8-inch LCD display (320 x 240 pixels) designed for the maintenance and development industry.

This device is equipped with 3 main functions: oscilloscope, multimeter, and signal generator.

The oscilloscope has an FPGA+MCU+ADC hardware architecture with a sampling rate of 50 MS/s, an analog bandwidth of 10 MHz, and a built-in high-voltage protection module that supports the measurement of peak voltages of ±400 V maximum.

The multimeter has a 4-digit 10000-point RMS value and supports AC/DC voltage and current measurements, as well as capacitance, resistance, diode, on/off, and other measurement functions.

Equipped with a built-in DDS function signal generator, it can output 7 kinds of function signals, with a maximum output of 2 MHz for all signals and a step of 1 Hz; the output frequency, amplitude, and duty cycle are adjustable.

The built-in 3000 mAh rechargeable lithium battery achieves a standby time of up to 6 hours.

Features:

• 2-ch oscilloscope
• 10 MHz bandwidth
• 50 MS/s real-time sampling rate
• 7 signal waveforms
• 10000 counts
• 2.8′ HD color display (320 x 240 pixels)
• Dimensions: 167 x 89 x 35 mm
• Weight: 300 g

Oscilloscope:

• Dual channel, 2x 10 MHz bandwidth, 50 MS/s real-time sampling rate
• Maximum measured voltage: ±400 V
• FPGA+ADC+MCU high-performance hardware architecture, capturing waveform details without loss
• Equipped with complete triggering functions (auto, single, normal)
• Equipped with efficient automatic adjustment, the measured waveform can be displayed without complicated adjustment
• Save waveform screenshots, supports exporting images to a computer, facilitate secondary waveform analysis

Multimeter:

• 4-bit integer 9999 counting True RMS measurement
• Identification of voltage, current, capacitance, resistance, diode, on/off, and zero live wire
• Maximum input voltage: AC 750 V, DC 1000 V
• Automatic range, intelligent anti-burning
• Data retention, color screen digital display

Signal Generator:

• 7 signal waveforms: sine wave, square wave, triangular wave, full wave, half wave, noise wave, DC
• Output frequency: 1 Hz-2 MHz
• Output amplitude: 0.1-3.3 V
• Output duty cycle: 0-100%

Package Contents:

• 1 * FNIRSI 2C23T (3-in-1) 2-ch Oscilloscope
• 1 * P6100 oscilloscope probes (10X)
• 1 * Multimeter probe
• 1 * Crocodile clip probe
• 1 * USB-C charging cable
• 1 * Original Manual by FNIRSI (English, German, Spanish, Portuguese, Russian, Chinese)