Phaetus PH Hardened steel nozzle 0.6/1.75mm
In 3D printing filaments, composite consumables containing abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigments are often very hard.Using regular nozzle printing, it will soon wear out the holes and inside diameter, destroying the original performance of the nozzle.
The hardness of the mo type of the hardened steel nozzle is 7.8, the highest printing temperature is 450 ℃, with high wear resistance, high temperature resistance. The Hardened Steel Nozzle is the user's first choice for printing high strength filaments!
Performance analysis: Special processing technology and post-treatment ensure fine hole and high smooth inner hole. Min 0.2mm (± 0.01mm) hole diameter to meet special application requirements and enable high accuracy printing. 450 ℃ general high temperature resistance, suitable for PEEK and other special engineering plastics. Top quality imported High Speed Steel Rods, special finishing treatment, high temperature hardness up to HRC62. DLC coating on the whole surface of the nozzle, hardness HV2500, thickness 2 µm and friction coefficient 0.03; excellent finish, low adhesion, high wear resistance.
Compatible Filament: Wear resistance, high temperature, suitable for 3D printing composites with abrasive additives such as carbon fiber, steel, wood, boron carbide, tungsten and phosphorescent pigment, as well as conventional materials.
Min. Hole Diameter φ0.10
Tolerance ± 0.01mm
Internal Bore Roughness ≤Ra0.4µm